Top Ranked Tips For Concrete Polishing
Among the industries that have evolved at a rapid speed is the polishing industry. This industry has many companies that have grown and others starting now. Since the industry is attracting a large population, many companies will keep coming up as time goes on. Quality concrete polishing can be done with the companies that apply the tips contained in this article. Below are the tips that can be applied in concrete polishing.
Determining the surface hardness is the first thing that should be done. This is done by testing its hardness using a concrete hardness tester. This helps in the selection of the abrasives. The tip number nine is the one used for scraping first. Then the scratching is then done in a decreasing order. This is done until the tip cannot do the scratching anymore. This is the level where the hardness is ok.
Then the concrete surface is then prepared. One can find coated floors for concrete polishing. In this case, the right tools should be used in the removal of the coating. This depend on the type of coating. Some floors may be damaged. These holes and cracks should be repaired first. Then gritting is done with the metal bond tooling to a level and flatness that is appropriate.
The next thing is the removal of tool marks. Transitional tooling can help here. The marks made by the tool can be removed very well with the use of transitional tooling. All the tool marks have to disappear for the tool mark removal process to be considered successful.
Then the floor is densified and hardened by vacuuming it. The floor is densified and solidified by the pore and crack filler. It helps avoid water penetration that can result in stains that can result due to water penetration. The pooling of the floor can result hence care should be taken to prevent it from happening. This is because the stains caused by poling can result to the stains that can make polishing hard to do.
Then concrete polishing is done. One is advised to start with the resign band. Then dust removal is done between the passes. Then with a burnishing pad, the floor is burnished when the final grit level is reached.
Then for protecting is done as the last thing. The protection is done by sealing the floor. Some of the things that the floor is protected from are the grease, oil and any other chemicals. The pump can be used to apply the sealer to the floor. The floor can be left shining after burnishing is done. Successful concrete polishing can be done with the tips given.